Introduction Spray up roving is a multi-end product
and uses a special sizing. These products are suitable
for FRP spray up forming process. The typical products
are boats, marine accessories, automotiveaccessories,
bathtubs, bathroom appliances, storage tanks, etc. The
roll should be pulled from the "inside" in most cases,
but can be pulled from the "outside" when a hard core
is used. Both E-Glass and C-Glass are available.
Product Characteristics
1. Tex is stable with uniform strand splitting.
2. Medium stiffness, good choppability and good chopped
strand dispersion.
3. Low Fuzz.
4. Good anti-static properties.
5. Quick resin wet out and easy air release.
